Mastering Tutorial: iZotope Ozone 5 Stereo Imaging – Part 5

https://www.fordeetv.com

iZotope Ozone 5 Stereo Imaging – Part 5 – In this tutorial I introduce you to the Stereo Imaging Module in iZotope Ozone 5 and talk a little about the Post Equalizer Module.

Topics covered include:
–Stereo Imaging–
Crossover Band View
Stereo Width View
Stereo Widening
Stereo Narrowing
Stereoize (Advanced Version Only)
VectorScope (Liss., Polar L, Polar S views)
Correlation Meter
Stereo Balance Meter
Inverting Channels
Mono Track Settings
And more…

Here’s part 5 of my iZotope Ozone 5 series. In this video I give an overview of the Stereo Imaging Module and briefly speak about the Post Equalization Module – with a demonstration of some parameters introduced to a house music track. Keep in mind that these parameters (along with the supplied presets) can be good starting points… but you will need to further modifying these parameters to suit the track you are mastering.

Don’t forget to watch part 1, 2, 3 and 4 of the series which introduces you to the Ozone 5 Interface, EQ and Harmonic Exciter, Reverb and Dynamics!

Download a trial version of Ozone at: http://www.izotope.com/products/audio/ozone/

Check out more of our videos at: https://www.fordeetv.com

Part 1 of this series: http://www.youtube.com/watch?v=UI30_Wphf3c

Part 2 of this series: http://www.youtube.com/watch?v=m2Auk15QyUg

Part 3 of this series: http://www.youtube.com/watch?v=LuSt_FR9NEI

Part 4 of this series: http://www.youtube.com/watch?v=GBpqtd_-Csk

Part 5 of this series: http://www.youtube.com/watch?v=hEg5pfftMl8

Part 6 of this series: http://www.youtube.com/watch?v=-jXMlkugmUs